The detailed steps to install a thermostat on your car are as follows:
- First open the hood of the car and remove the intake pipe.
- Then remove the thermostat, and blow off the dirt inside and around it with a high-pressure air gun.
- Remove the thermostat housing, being careful not to damage surrounding parts.
- Remove the thermostat core assembly from the fixing screw hole, tap or turn it gently to take it out.
- If installation is required, reverse the steps and place the thermostat core assembly inside the thermostat housing and secure with tape or screws.
- Finally, install the intake pipe and install the thermostat in place.
It should be noted that during the installation process, be careful not to damage the surrounding parts and ensure that the installation position is correct. At the same time, check whether the thermostat is intact before installation, and replace it in time if it is damaged.